Where a chamber goes decides which model fits. The four settings below cover almost every enquiry we receive — each one has a different constraint, and the constraint is usually space, staffing or noise rather than budget.
A clinic usually needs two things at once: a chamber the practitioner can supervise while doing something else, and a session that a patient will pay for repeatedly. That means an exterior control panel, a viewing port and an intercom as standard — not optional extras.
Most clinics start with one Mini or Cylindrical chamber and add a Luxury Double once the schedule fills. The double allows a practitioner inside with the client, or two clients in one slot.
Typical fit: Mini Chamber for a single treatment room; Luxury Double where two sessions run in parallel.
Team facilities and private performance centres want throughput: short sessions, several athletes per day, minimal setup between users. The chamber needs to be robust, easy to clean and quick to pressurise.
The Cylindrical model works well here because a seated session needs less floor length, so several units fit along one wall. Where the facility has an existing recovery room, the Mini rolls in and out on castors.
Typical fit: Cylindrical Chamber for seated sessions; Mini for a mobile setup.
In hospitality the chamber is a revenue line and a visual feature. Guests see it before they book, so finish matters as much as specification: interior lining, lighting, and how the unit sits in the room.
The Premium 1.5 ATA model is the usual choice, because the higher pressure ceiling supports a premium session tier and a higher price per session. Interior colour and branding can be specified.
Typical fit: Premium 1.5 ATA for a signature treatment; Luxury Double for couples.
Home buyers care about three practical things: whether it fits through the door, whether it can run on a normal household circuit, and whether it is quiet enough to use in the evening.
The Mini is designed for this: 1600 × 866 mm footprint, separate electrical cabinet that sits against a wall, castors for repositioning. We supply the electrical requirement and the noise figure before you order, so you can check both against your installation.
Typical fit: Mini Chamber.
Send the room length, width and ceiling height, plus how many sessions per day you expect. We reply with the model that fits the room and the schedule, not the most expensive one in the range.
Model, quantity and destination port — you get a CIF price and lead time, usually within one working day.
Request a Quote